🧱 Concreting in Logan
Compare 65 concreting operators across Logan. Driveways, paths, slabs and decorative concrete.
Plain driveway, per square metre: $95 – $165
Concrete work in SEQ covers everything from house slabs to decorative pours (exposed aggregate, stamped, polished). Pricing varies hugely by finish: a plain driveway and a polished-concrete slab look the same on quote until you read the line items.
Concreting operators in Logan
Verified operators ranked first. Listed entries are sourced from public records and may not yet be claimed by the operator.
Absolute Concrete Solutions
Listed📍 Eagleby
Adbri Masonry - Beenleigh
ListedAround The Block Rock Walls
ListedBP Concrete Pumping
Listed📍 Slacks Creek
C&C Concreting
Listed📍 Jimboomba
Cantwell Concreting
Listed📍 Logan Central
Carroll Group Aus
Listed📍 Kingston
CCS Group
Listed📍 Tamborine
Chris Murray Concreting
Listed📍 Slacks Creek
Cobble Patch Landscape Supplies
Listed📍 Kingston
Cobble Patch Landscaping Supplies
Listed📍 Jimboomba
Cobblestone Paving Brisbane
Listed📍 Springwood
COMPLETE CONCRETE + COVERINGS
ListedComplete Concrete Qld
ListedConcord Industrial Coatings
ListedConcrete By Chris
ListedConcrete Genie Pty Ltd
Listed📍 Slacks Creek
Concrete Stone Care Qld Pty Ltd
Listed📍 Daisy Hill
Concrete Warehouse
ListedConcut
Listed📍 Springwood
Conquest Concreting
Listed📍 Underwood
Construction Sciences Brisbane (Kingston)
Listed📍 Kingston
Cutrite Concrete Cutting & Core Drilling Brisbane
ListedDurable Concrete Coatings® Epoxy Supplies Brisbane
Listed📍 Underwood
ERH Concreting
Listed📍 Flagstone
Fletcher Z Concreting and Excavation
Listed📍 Jimboomba
Gary White Concreting
ListedGrind and Shine Concrete
ListedHy-tec Concrete & Aggregates Yatala
ListedHymix - Springwood
Listed📍 Slacks Creek
Showing top 30 of 65 operators. Refine by area below.
📅 When to book
Plain pours 2-4 weeks. Decorative work (exposed aggregate, polished, stamped) needs 3-6 weeks for material lead-time. Avoid wet-season pours where possible.
📋 License & verification
Concrete work over $3,300 requires QBCC license. Structural slabs (homes, retaining) need engineer-certified design + QBCC builder, not just a concreter.
⚠️ Common mistakes
- •Skipping the moisture barrier on a slab — leads to rising damp years later
- •Ordering inadequate concrete strength for the application — N20 for footpath, N25 minimum for driveway, N32+ for structural
- •Under-speccing reinforcement or thickness for the load — a driveway carrying vehicles needs more than a path; under-spec concrete cracks and can't be patched cheaply
Frequently asked questions
How long before I can drive on a new driveway?
Foot traffic at 24 hours, light vehicles at 7 days, heavy trucks at 28 days when concrete reaches design strength. Don't park heavy vehicles or trailers on it before then.
What's the difference between exposed aggregate and stamped concrete?
Exposed aggregate reveals the stone within the mix — durable, slip-resistant, costs ~30% more than plain. Stamped concrete is texturally pressed to look like pavers or tiles — high upfront cost but no jointing maintenance.
How much does a concrete driveway cost in SEQ?
Plain concrete is cheapest per square metre; exposed aggregate and coloured finishes cost more, and stamped or polished more again. Site prep, fall, drainage and access drive the final number — get an on-site measure-and-quote.
How long before I can drive on new concrete?
You can usually walk on it after 24-48 hours, but wait about 7 days before driving a car onto a new driveway and up to 28 days for full strength. Loading it early is a common cause of cracking.